Introduction: The A2060 engine fuel saturated vapor pressure tester is designed and manufactured according to GB/T 8017 and ASTM D323 standards and is suitable for measuring the vapor pressure of gasoline, volatile crude oil and other volatile petroleum products. Features: The fully automatic saturated vapor pressure measuring device controlled by single-chip microcomputer has convenient operation, high degree of automation and accurate test results. Advanced heating technology, while achieving water and electricity separation, also reduces the total height of the water bath, clear bottom, easy to clean. LCD display, full Chinese interface, when the measurement is finished, the system will give an audible prompt and lock the test result. Configure the printer to print the results. Technical Parameters: Working power supply: AC220V±10%, 50Hz Instrument power consumption: ≤1700W Experimental bomb: 3 test bombs at the same time Water bath temperature: 37.8 °C Temperature control accuracy: ±0.1 °C Heating power: 1600W Projectile movement : seesaw reciprocating Pressure range: (0 ~ 200) kPa or (0 ~ 29) psi Ambient temperature: -10 to 35 ° C Relative humidity: ≤85% Dimensions: 600mm × 500mm × 456mm
Introduction: The A2060 engine fuel saturated vapor pressure tester is designed and manufactured according to GB/T 8017 and ASTM D323 standards and is suitable for measuring the vapor pressure of gasoline, volatile crude oil and other volatile petroleum products.