A2030 Automatic Cold Filter Point Tester Introduction
The A2030 Cold Filtration Point Tester conforms to SH / T 0248, and is suitable for measuring the cold filtering point of distillate fuels including diesel engine fuels containing flow improvers or other additives, and fuels for civil heating installations. Features
The imported compressor refrigeration system ensures the required refrigeration depth.
The built-in vacuum pump and electronic precision pressure balance system ensure that the suction pressure is automatically balanced at the set value.
Automatically control the temperature difference between the cooling medium and the tested sample to ensure that the cooling rate is controlled and uniform and stable.
Internal precision microcomputer timing to ensure the accuracy of judgment results. Technical Parameters
Temperature range: -70 ～ 50 ℃
Resolution: 0.1 ℃
Pressure range: 0 ～ 2kPa (200mmH2O)
Resolution: 1mm
Working cold tank: single bath two bath, two bath isothermal
Temperature measuring element: PT100 (temperature measuring sensor of German JUMO company)
Refrigeration method: compressor refrigeration (Danfoss, France)
Time counting: 60s 1s
Ambient temperature: 5 ℃ ～ 40 ℃
Relative humidity: ≤85%
Working power: AC220V ± 10%, 50Hz
Power consumption: <900W
Dimensions: Main machine: 600mm × 450mm × 450mm
Extraction filter: 250mm × 150mm × 380mm
Weight: Host: 50kg
Strainer: 5kg
Introduction
The A2030 Cold Filtration Point Tester conforms to SH / T 0248, and is suitable for measuring the cold filtering point of distillate fuels including diesel engine fuels containing flow improvers or other additives, and fuels for civil heating installations.
