A2004 Petroleum Product Atmospheric Distillation Characteristics Tester Introduction: The A2004 petroleum product atmospheric distillation characteristic tester is applicable to the standard GB9168-1997 "Petroleum Product Vacuum Distillation Determination Method" (equivalent to ASTM D1160 standard), and is used to detect the boiling point of partially or completely evaporated petroleum products. This instrument adopts MCS-51 series microcontroller as the system control center, color LCD display screen, Chinese menu human-machine dialogue, guided operation, and fully automated measurement process. characteristic: 1. Intelligent heating management system ensures that the distillation rate meets the requirements of the experimental method. 2. Record the user's own settings: 3. Users can set the recovery volume to record the corresponding temperature 4. Users can set the temperature to record the corresponding recycling volume 5. Automatically record the record points specified by the national standard Technical parameters: Display mode: 6-inch 256 color LCD screen displaying both Chinese and English Test range: Room temperature to 400 ℃ Resolution: 0.1 ℃ Temperature detection: specially designed platinum resistance (Pt100) sensor Distillation rate: 2-9mL/min Condenser tube: Temperature control range: room temperature~90 ℃, can be set arbitrarily Reception room: Temperature control range: Room temperature~80 ℃, freely set Liquid testing: infrared photoelectric detection Cold trap: Cooling temperature: -40 ℃ Refrigeration method: Compressor refrigeration (Danfoss compressor) Pressure reduction and control: Range: 130Pa~6.7kPa, can be set arbitrarily Accuracy: (kPa ± 0.01) 1kPa 1% Power: 2200W Distillation power: 1000W Furnace cooling: forced air cooling Power supply: AC220V 50/60Hz Dimensions: 850mm × 980mm × 500mm Operating environment: -10 ℃~+30 ℃, relative humidity not exceeding 70
Introduction: The A2004 petroleum product atmospheric distillation characteristic tester is applicable to the standard GB9168-1997 "Petroleum Product Vacuum Distillation Determination Method" (equivalent to ASTM D1160 standard), and is used to detect the boiling point of partially or completely evaporated petroleum products. This instrument adopts MCS-51 series microcontroller as the system control center, color LCD display screen, Chinese menu human-machine dialogue, guided operation, and fully automated measurement process.
