44B type dual electrolysis analyzer Introduction: This instrument is a complete set of equipment for analyzing non-ferrous metals using electrolysis method. By selecting appropriate electrolytic solutions and current intensity or decomposition voltage, it is possible to analyze elements such as copper, lead, nickel, tin, zinc, etc., and achieve precise quantitative analysis. Technical parameters: 1. Parameter air temperature 0-50 ℃ Air humidity ≤ 95% Power supply voltage AC 220V/110V power supply frequency (50-60) Hz 2. Indicator meter: The accuracy of the instrument's indicator meter shall not be lower than level 2.5. 3. Stirrer: The electromagnetic stirrer of the instrument adopts a phase reversible electric motor device. During normal operation, its speed range can make the solution move from near rest to significant vortex generation. 4. Electric heater: The high power of the electric heater should not be less than 70W and can be adjusted. 5. Line insulation: The insulation resistance of the instrument's power line to ground shall not be less than 20M Ω. 6. Dimensions: Width x Depth x Height=505 x 400 x 500 (millimeters). 7. Instrument weight: approximately 40kg. 8. Power consumption: up to 450W.
Introduction: This instrument is a complete set of equipment for analyzing non-ferrous metals using electrolysis method. By selecting appropriate electrolytic solutions and current intensity or decomposition voltage, it is possible to analyze elements such as copper, lead, nickel, tin, zinc, etc., and achieve precise quantitative analysis.
