3010 Optical Smoke Analyzer Introduction: The 3010 optical smoke analyzer adopts imported optical detection devices, mainly used for the analysis of smoke components such as O ₂, SO ₂, NO, NO ₂, CO, CO ₂ in fixed pollution source exhaust. The specially selected sensor can effectively remove water vapor interference, especially suitable for on-site monitoring of low temperature, high humidity, low concentration emissions, etc. It has the characteristics of high measurement accuracy, fast response time, strong anti-interference ability, and long service life. Scope of adaptation 1. Especially suitable for analyzing the composition of high CO, high humidity, and low SO ₂ flue gas; 2. CEMS acceptance, calibration, and calibration; 3. Determination of efficiency of various desulfurization and denitrification equipment; 4. Determination of exhaust parameters for flues and pipelines; 5. Determination of oxygen content and excess air coefficient in flue gas; 6. Accurate determination of moisture content in pipelines and flues; 7. Determination of SO ₂, NO, NO ₂, CO, CO ₂ emission concentrations, converted concentrations, and total emissions from various boilers and industrial furnaces. Characteristic： 1. Small size, light weight, and easy to carry; 2. The smoke and dust filtration adopts a two-stage filter to reduce measurement errors; 3. Large scale data communication software that can archive monitoring data from previous years for future reference; 4. Set parameter memory, automatic fault protection, machine parameter software calibration; 5. Embedded single board computer, Windows 7 operating interface, dynamic display of gas absorption curve; 6. Flip up large screen 7-inch color display, online prompts, simple and clear operation; 7. Directly measure O ₂ Ts、Pt、Pd、Qsnd； 8. Special sensors are used for detecting gases such as SO ₂, NO, CO, and CO ₂, which have been humidity corrected; 9.60G electronic hard drive, specially designed sampling pump, capable of achieving fixed unmanned 24-hour monitoring; 10. Real time display of monitoring data minute averages, with the option to print, store, and export averages for any time period; 11. Constant current sampling ensures constant pressure in the measurement chamber and performs pressure and temperature corrections; 12. The resistance capacitance method is used to measure the humidity of flue gas, and the data is reliable (optional).
Introduction: The 3010 optical smoke analyzer adopts imported optical detection devices, mainly used for the analysis of smoke components such as O ₂, SO ₂, NO, NO ₂, CO, CO ₂ in fixed pollution source exhaust. The specially selected sensor can effectively remove water vapor interference, especially suitable for on-site monitoring of low temperature, high humidity, low concentration emissions, etc. It has the characteristics of high measurement accuracy, fast response time, strong anti-interference ability, and long service life.
