Introduction: Microwave is a high-frequency electromagnetic wave that does not generate heat by itself. Natural microwaves cannot be used as an energy source because they are not concentrated. The magnetron used can convert electrical energy into microwaves and penetrate the medium at an oscillation frequency of 2450 MHz per second. When the medium has a suitable dielectric constant and medium. When it is worn out, high-frequency oscillation occurs in the electromagnetic field, and energy is accumulated inside the medium. For chemical reactions, both thermal and non-thermal effects can be produced. Non-polar materials such as tetrafluoroethylene; but will be reflected on the metal surface. The power output of the microwave oven of the household microwave oven is basically fixed, and the smaller power is realized by changing the on/off time of the current (the ratio of empty space). The on/off of the current used by the microcomputer can be performed more strictly and timing, and the same working conditions can be selected to obtain repeated chemical reaction conditions. Features: 1. The full power output microwave energy of this product is 800W. 2. This device can set 5 power levels and achieve the desired effect through different on-off times. 3. Select the different power and working time to obtain the same reaction conditions, and the experiment is satisfactory repeatability. 4. Applicable to the installation of the reflow device, while ensuring the cut-off waveguide without microwave leakage. 5. Adjustable height Teflon tray. 6. Glass fittings for chemical reactors. Technical Parameters: Rated power consumption (W): 1300 Maximum input power (A): 7.8 Rated Output Power (W) : 800 WBFY-205 Dimensions (mm): 380 × 420 × 400 Inner cavity size (mm): 300 × 300 × 200 Body weight (kg): 16.5 Inner cavity material: stainless steel
Introduction: Microwave is a high-frequency electromagnetic wave that does not generate heat by itself. Natural microwaves cannot be used as an energy source because they are not concentrated. The magnetron used can convert electrical energy into microwaves and penetrate the medium at an oscillation frequency of 2450 MHz per second. When the medium has a suitable dielectric constant and medium. When it is worn out, high-frequency oscillation occurs in the electromagnetic field, and energy is accumulated inside the medium. For chemical reactions, both thermal and non-thermal effects can be produced. Non-polar materials such as tetrafluoroethylene; but will be reflected on the metal surface. The power output of the microwave oven of the household microwave oven is basically fixed, and the smaller power is realized by changing the on/off time of the current (the ratio of empty space). The on/off of the current used by the microcomputer can be performed more strictly and timing, and the same working conditions can be selected to obtain repeated chemical reaction conditions.