1500W 1080nm multimode continuous fiber laser Introduction: Compared with traditional lasers, fiber lasers can increase the conversion efficiency of pump light per watt by more than 10 times, photoelectric conversion efficiency is higher than 35%, lower energy consumption, high reliability, maintenance-free, long service life and cost-effectiveness. Far better than other types of lasers This series of multi-mode 1500W wavelength 1080nm fiber lasers is an industrial grade product for metal laser cutting, laser welding, laser cladding, laser drilling, and metal 3D printing. Due to the flexible transmission of the fiber to the output, it can be easily installed and used in the customer's complete machine. Adopt international standard QBH fiber output head. The international standard RS232 serial port control, combined with special monitoring software, facilitates the status monitoring and alarm prompting of the laser. Features: 1. Extremely high power stability (power fluctuation <3%) 2. Good beam quality, high energy intensity, photoelectric conversion efficiency (>35%) 3. Long service life, maintenance-free, low cost of use 4. Excellent anti-high-resistance ability, can cut high-reflection materials such as aluminum and copper Technical Parameters: Working mode: continuous / modulation Polarization: Any Center wavelength nm: 1077-1083 Full height half width spectrum width nm: <3 Rated maximum output power W: ≥1500 Power adjustment range%: 10-100 Power stability% (>24 hours): <3 Beam quality BPP: <4 Maximum modulation frequency KHz: 20 Waveform rise and fall time us: 10 Laser output head: QBH Output fiber length M: 10-15 or customized Cooling method: water cooling Cooling water temperature °C: 25±1 Working environment temperature °C: 5～40 Storage temperature °C: -10～60 Working voltage VAC: 380±10% 50/ 60Hz Power consumption W: 6000 Product size LxWxH mm: 1110*703*750
Introduction: Compared with traditional lasers, fiber lasers can increase the conversion efficiency of pump light per watt by more than 10 times, photoelectric conversion efficiency is higher than 35%, lower energy consumption, high reliability, maintenance-free, long service life and cost-effectiveness. Far better than other types of lasers This series of multi-mode 1500W wavelength 1080nm fiber lasers is an industrial grade product for metal laser cutting, laser welding, laser cladding, laser drilling, and metal 3D printing. Due to the flexible transmission of the fiber to the output, it can be easily installed and used in the customer's complete machine. Adopt international standard QBH fiber output head. The international standard RS232 serial port control, combined with special monitoring software, facilitates the status monitoring and alarm prompting of the laser.
