Introduction: The 1465 series signal generator covers the frequency range from 100kHz to 67GHz with excellent spectral purity and output power. Single sideband phase noise 10GHz carrier @10kHz frequency offset -126dBc/Hz, maximum output power up to 1W@20GHz, output power dynamics The range is greater than 150dB, which can meet the high-end requirements of test signals; with high-precision analog scanning function, excellent performance of analog modulation and pulse modulation, the internal modulation signal generator frequency is up to 10MHz, the signal waveform is diverse, the pulse modulation minimum pulse width is 20ns and It can generate flexible pulse trains, which can meet various test requirements for analog modulation and pulse modulation. It has a large display screen of 10.1 inches, high resolution of 1280×800 pixels, and supports various operation modes such as buttons, mouse and touch screen. The operating experience can improve test efficiency. 1465 Whether it is continuous wave or modulated signal, the signal quality is excellent, it is an ideal local oscillator source and clock source, and it is also a high-performance analog simulation signal source, mainly used for radar performance comprehensive evaluation, high-performance receiver test and component parameter test. In other aspects, it is applicable to many fields such as aviation, aerospace, radar, communications and navigation equipment. Features: 1. Excellent spectral purity 2. Broadband high power output 3. High frequency power stability 4. Flexible large-screen touch operation 5. Frequency band serialization is complete 6. High precision analog scanning 7. Super power dynamic range 8. Excellent analog modulation 9. High performance pulse modulation 10. Multiple control and function expansion interfaces typical application： 1. Comprehensive evaluation of electronic system performance The 1465 series signal generator can generate high spectral purity, high power output and high stability signals in the frequency range of 100 kHz to 67 GHz. It is used in the comprehensive performance evaluation of electronic systems such as radar, electronic warfare, and communication equipment to solve bandwidth and sensitivity. System indicator test problems such as dynamic range and intermodulation distortion. 2. High performance receiver test The 1465 Series signal generator features ultra-low single-sided phase noise and excellent non-harmonic rejection for excellent, clean signals for high-performance receiver phase noise, blocking, and neighboring in radar, electronic warfare, and communications equipment. Tests such as channel selectivity. 3. High-power device testing With a maximum output power of 1W, the 1465 Series signal generators can test high-power devices without the need for an external amplifier and overcome test system losses, with higher signal power accuracy and better stability. 4. Electronic equipment sophisticated test The 1465 series signal generator has high frequency and power stability in the operating temperature range of 0 to 50 °C. It can be used in the testing of electronic equipment and requires continuous testing of the instrument for several days or even tens of days. 5. Excitation signal and local oscillator replacement The 1465 series signal generators have extremely pure signal quality and extremely high output power. They can be used for signal excitation of various amplifiers, and can also be used as an ideal local oscillator to replace the local oscillator in the tested equipment such as transmitters and receivers.
If you want to know more, please ask for more instruments related technical documents.
